Horizon Fuel Cell Technologies Automobile Parts 180-1010 User Manual
15
Installation
Manual
FASS FUEL SYSTEM
STEP 3:
Mounting FASS System: Use the following photo’s to complete
this step:
Photo 3A
Photo 3B
Photo 3C
Photo 3D
1.
Assemble the fuel pump bracket to the FASS System using the 5 washers & bolts. The
2 - 3/16 washers & ¼” x 1” bolts will be used to space the bracket away from the main
base of the FASS. The 3 – 11/16” washers & ¼” x 1 ½” bolts will be used to space the
bracket away fro the pump assembly of the FASS. Refer to photo 2A. Torque to proper
specifications.
2 - 3/16 washers & ¼” x 1” bolts will be used to space the bracket away from the main
base of the FASS. The 3 – 11/16” washers & ¼” x 1 ½” bolts will be used to space the
bracket away fro the pump assembly of the FASS. Refer to photo 2A. Torque to proper
specifications.
2.
Assemble 3/8” x 1/2" (push lock x mpt) fittings into ports label with the letters “T” and
“E” using tread tape. Refer to photo 2A. Torque to proper specifications.
“E” using tread tape. Refer to photo 2A. Torque to proper specifications.
Note: The FB-1001 (frame bracket) now has multiple slots, use the slots at the end of the
bracket.
3.
Assemble the FASS System with bracket to the frame bracket as seen in photo 3B
using the 4 – 3/8” bolts and flanged nuts. (NOTE: This photo is from a different make
of truck but the bracket assembly is the same.)
using the 4 – 3/8” bolts and flanged nuts. (NOTE: This photo is from a different make
of truck but the bracket assembly is the same.)