B&K AVR212 User Manual
62
ADVANCED FEATURES
WARNING -
The following describes the advanced features of the receiver. Since changing some of
these functions may cause severe effects such as no sound or no remote control operation, we suggest you leave
this menu disabled (hidden) for normal operation. If you are unsure of what you are changing
this menu disabled (hidden) for normal operation. If you are unsure of what you are changing
DO NOT
perform
any advanced operations. These features may be activated by simultaneously pressing the SLEEP, DOWN, and
UP buttons on the front panel of the receiver.
UP buttons on the front panel of the receiver.
ADVANCED
Usually these settings may be left set to the factory defaults. However, these settings allow additional
modifications to the operation of your receiver. Make sure you are in the SETUP SYSTEM MENU and your
remote is in B&K mode.
modifications to the operation of your receiver. Make sure you are in the SETUP SYSTEM MENU and your
remote is in B&K mode.
From Remote
From Front Panel
Action
1
À(PAUSE) or §(STOP)
(UP) or (DOWN)
move to Advanced
2
SEL or ENTER
(ENTER)
activate ADVANCED SYSTEM SETUP
Zone 1 (A) Setup
Zone A has been factory default set to use a Zone ID setting of 1. Zone 1 (A) configuration will allow you to set
maximum volume level, remote control ‘Zone’ ID, OSD enable, V1 tape mode and the surround operation. Make
sure you are in the ADVANCED SYSTEM SETUP menu and the remote is in B&K mode.
maximum volume level, remote control ‘Zone’ ID, OSD enable, V1 tape mode and the surround operation. Make
sure you are in the ADVANCED SYSTEM SETUP menu and the remote is in B&K mode.
From Remote
From Front Panel
Action
1
À(PAUSE) or §(STOP)
(UP) or (DOWN)
move to Zone 1 (A) Setup
2
SEL or ENTER
(ENTER)
activate ADVANCED ZONE 1 (A) SETTINGS
MAIN MENU
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup
6 Memory Backup/Restore
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup
6 Memory Backup/Restore
next item SEL select
MENU exit menu system
MENU exit menu system
5 System Setup
SETUP SYSTEM
1 Speakers
2 Displays
3 Inputs
4 Presets
5 Music Modes
6 Advanced
1 Speakers
2 Displays
3 Inputs
4 Presets
5 Music Modes
6 Advanced
next item SEL select
MENU main menu
6 Advanced
SETUP ADVANCED
SYSTEM SETUP
ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port
next item SEL select
MENU setup system
MENU setup system
1 Zone 1 Setup 'A'
ADVANCED ZONE A SETTINGS
1 Max Level +15 dB
2 Zone ID 1
3 On Screen Display User
4 V1 Output Tape
5 Surround Modes Auto
6 Favorite Recall use ENTER
1 Max Level +15 dB
2 Zone ID 1
3 On Screen Display User
4 V1 Output Tape
5 Surround Modes Auto
6 Favorite Recall use ENTER
next item adjust
MENU advanced setup
1 Max Level +15 dB
Z1 SETUP "A"
ZA MAX LEVEL +15