B&K AVR212 User Manual

 

63

Set the maximum level of Zone 1 (A) - Max level allows you to set a maximum volume level for Zone 1 (A). This 
is very useful if you are using speakers that can’t handle the maximum power output from your receiver or if you 
simply wish to limit the volume that can be achieved using normal front panel or remote operation.  
 
WARNING - If you set this level too low, the receiver may appear broken (no sound). 

 

From Remote 

From Front Panel 

Action 

1 

À(PAUSE) or §(STOP) 

(UP) or (DOWN) 

move to Max Level 

2 

¶

(REW) or

 •

(FF) 

VOLUME KNOB 

adjust level to desired value 

 
Set the Zone ID for Zone A - Each message transmitted from your remote includes a Product ID Code Set (See 
Zone ID), which allows independent command and control of the receiver’s Zones A and B. Set the desired zone 
ID number for use with Zone A (default 1). You may not set the Zone A zone ID to the same setting as Zone B 
(default 2) or vice versa If you need to set Zone A to the current Zone B setting then you must first set Zone B to 
some other Zone ID value. 
 
WARNING - if you change the Zone product ID code set in the receiver without making the corresponding 
change to the remote then the remote will no longer appear to work. Refer to the separate remote manual 
for details on changing the remote’s product ID code set (“device code”). 
 

 

From Remote 

From Front Panel 

Action 

1 

À(PAUSE) or §(STOP) 

(UP) or (DOWN) 

move to Zone ID 

2 

¶

(REW) or

 •

(FF) 

VOLUME KNOB 

adjust Zone 1 (A) ID to desired value 

 
Set Zone 1 (A) On Screen display usage - During normal operation, when you make a change to a system 
setting or your receiver detects a change to the incoming audio or video, a message is overlaid along the bottom 
of your video screen. You can turn off the overlay display from this menu. This will not affect the on-screen 
displays when you enter the menu system. 

ZA  max level +15

ZA ZONE ID     1