Murphy PVS-5 Leaflet

 
 

Warranty - A limited warranty on materials and workmanship is given with this FW Murphy product.  A copy of the warranty 
may be viewed or printed by going to www.fwmurphy.com/support/warranty.htm 

 

 

The PVS-5 can be mounted under or behind the dash using cable ties or screws. Refer to the following installation 
examples when mounting the power supply device. 

CAUTION:  The mating connector does not 
have a water tight seal.  If the device is 
mounted in a location exposed to the risk of 
moisture, then the device should be mounted 
in an orientation that will protect the 
connector from water seepage (connector 
facing down) or sealed against moisture. 

 

 

Mounted using two #8 screws 

 

 

Mounted using cable ties through 

each of the mounting holes. 

 

Mounted using one cable tie  

across the device. 

The pin out information for the 4 pin connector is shown  below.   

Mating Connector – Tyco Electronics AMP Mini 
Universal Mate-N-Lok Plug Housing 4 Position, 
AMP P/N 172338-1 
Murphy P/N 00-00-6935