Bravetti MC665H User Manual

Using the Bake Function

Use the baking function for cake mixes, 

bread mixes, or light deserts.
Do not

fill the cooking pot past the “max” 

line with batter or below the “min.” line. 

This could result in the mixture being 

under cooked or burnt.

1. Prepare mixture in a separate bowl.

2. Lightly grease the inside of the 

cooking pot.

3. Pour batter into the cooking pot and 

place into the unit.

4. Plug the unit into the wall outlet.

5. Press down on the cover until it clicks 

into place.

6. Press the function button four (4) 

times until the arrow on the LCD 

display is pointing to the bake

function. (Fig. 11)  The numbers will 

not flash on the LCD display. The 

default time for the bake function is 

50 minutes.

Using the Slow Cook Function

Use the slow cook function for a 

variety of meals that require a longer 

cooking time. Do not fill the cooking 

pot past the “max” line with food or 

below the “min.” line. This could result 

in the food boiling over or burning.

1. Prepare dish to be cooked.

3. Place food into the cooking pot 

and place into the unit.

4. Plug the unit into the wall outlet.

5. Press down on the cover until it 

clicks into place.

6. Press the function button five (5) 

times until the arrow on the LCD 

display is pointing to the slow cook

function. (Fig. 13) The numbers 

“01” will flash on the LCD display.

7. Press the adjust button to increase 

the number of hours. The 

maximum hours that can be set is 

four (4) hours. 

8. Press the timer button to get the 

“:00” to flash. This means the 

minutes can be set for the 

slow cook time required.

16. Place the handle back onto the 

pasta/steamer insert and slowly 

remove the insert allowing water to 

drain as the insert is lifted up.

Remove the pasta/steamer 

insert carefully to avoid burns or injury.

: Allow the unit to cool completely 

before cleaning.

17. Empty the water collector after each 

use. Allow the unit to cool 

completely before cleaning.

10. Using pot holders remove the 

cooking pot from the unit and allow 

to cool for a minimum of 2 minutes 

before removing the baked goods 

from the cooking pot.

11. To remove the baked goods from 

the cooking pot, place a plate over 

the top of the cooking pot, holding 

the plate and cooking pot, turn 

upside down, and allow the cake to 

fall onto the plate.  Lift cooking pot 

up gently. (Fig. 12)

7. Press the start button.

8. Allow the mix to bake for complete 

baking cycle of 50 minutes to 

ensure that cake is baked right 

through.

: If the food being baked is not 

done, re-select the bake function, 

press start and cook for an additional 

5 minutes. The unit will have to be 

stopped manually when baking is 

done. Time is not adjustable on this 

function.

9. When the cycle is complete the 

unit will beep. Press the stop 

button. 

Using the Keep Warm Function

The keep warm function can be used to 

keep foods that have been prepared 

warm until ready for serving, or to keep 

foods warm that have been prepared in 

advance.

use this function to 

cook food.

In most functions, once the cooking 

process has been completed the unit will 

automatically go to the keep warm 

function after one (1) minute. To initiate 

the keep warm function manually:

1. Plug unit into the wall outlet.

2. Fill the cooking pot with ingredients 

to keep warm.  

3. Press down on the cover until it clicks 

into place.

4. Press the function button five (5) 

times until the keep warm light 

illuminates. (Fig. 14)

9.

Press the adjust button to increase 

the minutes required for food being 

cooked. The minutes can be 

adjusted up to :59 minutes. Choose 

the cooking time required based on 

type of dish being prepared and 

amount.

10. Press the start button to begin the 

cooking process. The “:” (colon) on 

the LCD display will flash indicating 

that the timer is counting down.

11. When the function is complete the 

unit will beep. One minute later if the 

stop button has not been pressed 

the unit will switch to the keep warm 

function. After 6 hours the unit will 

automatically shut off.

12. Press the stop button and unplug the 

unit.

13. Allow the unit to cool completely 

before cleaning. 

The poacher/warmer can be used 

alone or when preparing other items 

such as pasta or steamed vegetables.

To use the poacher/warmer the 

pasta/steamer insert must be used:

1. Add required amount of  water to 

the cooking pot for food being 

prepared in the pasta/steamer 

insert.

2. Add food to be prepared into the 

pasta/steamer insert and close 

lids.

3. Place the poacher/warmer into the 

pasta/steamer insert. (Fig. 15)

5. Press the start button to begin the 

keep warm process. The “:” (colon) 

on the LCD display will flash 

indicating that the timer is counting 

up.

: The unit will automatically shut off 

after a 6 hour period has elapsed. 

4. Press down on the cover until it 

clicks into place.

5. Plug the unit into the wall outlet.

6. Select the function required and 

adjust time.

7. Press stop when cooking is 

complete, insert handle into 

pasta/steamer and remove food.

8. Remove plug from wall outlet and 

allow unit to cool completely before 

cleaning.

: If warming a sauce in the 

warmer it can be left in the 

poacher/warmer safely until the food 

being cooked in the pasta/steamer 

insert is complete.