Panasonic Arbitrator 360 Operating Guide

Page of 140
116
Error messages 
(continued)
No.
Message
Measure
E00449 Unexpected update failure.
Some other update error occurred.
•  Check whether the update file for this 
unit has been correctly copied to the 
P2 card or USB memory device.
•  Reformat the P2 card or USB memory 
device before use. 
•  Use another USB memory device. 
E00466
E00467
E00499
E00602 AG-RCP30 needs to be 
updated!
Will start updating soon.
A connected AG-RCP30 was found to 
need an update. 
This unit reboots automatically to start 
an update.
E00603 Unsupported Control Panel!
Replace Control Panel.
A Remote Control Panel not supported 
by this unit was detected. 
Disconnect the Remote Control Panel.
E00604 ACC Off detected !
Will power off after uploading.
Turn ACC ON to cancel
power off.
The vehicle engine switch is set to 
LOCK (OFF) when “PowerOff Time” on 
page 75 is set to “AUTO”. The system 
awaits control from a PC application to 
be released.
To continue using the recorder without 
turning it off, set the engine switch to ON.
E02431 DSP error. Playback and 
record cannot be performed.
Wait until the error message is cleared. 
Contact your supplier if the message 
does not clear after about a minute.
E02432
E02440 System error
Couldn’t format P2 cards.
Insert another P2 card.
E02441 Couldn’t format P2 cards.
E02442 Found read only P2 cards.
Couldn’t format.
Disable P2 card write-protection.
E02443 Not P2 card.
Couldn’t format.
The inserted card is not a P2 card. 
Replace the card with a P2 card.
E02444 No card.
Couldn’t format.
Insert a P2 card.
E02460 System error
Couldn’t delete files.
Contact your supplier.