Panasonic Arbitrator 360 Operating Guide

117

T

roubleshooting 

and Reference

E02461 Couldn’t delete files.

Check the card information, and proceed 

as follows according to the information.

  CARD PROTECT:

     Release the write-protect switch of the 

P2 card.

  UNFORMATTED:

    Replace with the formatted P2 card.

  REFORMAT: 

     Upload or export data to back it up and 

reformat the card.

  NO CARD: 

    Insert a P2 card.

  Others: 

    Replace the P2 card with another one.

E02470 System error

Couldn’t restore files.

Contact your supplier.

E02471 Couldn’t restore files.
E02481 Write error on slot1.

Record cannot be continued.

Be sure to use the correct procedure 

to remove and load P2 cards. Replace 

a P2 card that is not recognized after 

inserting it in the P2 card slot and 

closing the P2 card slot cover.

E02482 Write error on slot2.

Record cannot be continued.

E07671 Camera communication error.

Camera cannot be controlled.

The Color Camera may not be correctly 

connected. Check whether the camera 

cable (included in the Color Camera) 

is correctly connected to the Color 

Camera. Contact your supplier if this 

measure does not solve the problem.

E08601 Lid open.

Playback and record cannot 

be performed.

Close the P2 card slot cover.

E08602 The recorder’s fan has 

stopped.

Contact your supplier.

E10400 Radar model file not found.
E10401 More than five radar model 

files found.

E10402 Invalid radar model file found.
E10403 Radar model file read error.
E10410 Radar communication error.

Please check the radar setting.

E15751 Card is run-down.

Replace P2 card on slot1.

A P2 card is nearing the end of its 

service life. While it will still be possible 

to record and play back a P2 card after 

this message has appeared, you are 

recommended to replace it.

E15752 Card is run-down.

Replace P2 card on slot2.