Brocade Communications Systems Switch 53-1001762-01 User Manual
Converged Enhanced Ethernet Command Reference
97
53-1001762-01
debug lacp
6
DRAFT: BROCADE CONFIDENTIAL
debug lacp
Enables debugging for the Link Aggregation Control Protocol (LACP).
Synopsis
debug lacp {all | cli | event | nsm | pdu {rx {all | interface tengigabitethernet slot/port} | tx {all |
interface tengigabitethernet slot/port} }| sync | timer | trace level number}
interface tengigabitethernet slot/port} }| sync | timer | trace level number}
no debug lacp {all | cli | event | nsm | pdu {rx {all | interface tengigabitethernet slot/port} | tx { all
| interface tengigabitethernet slot/port} }| sync | timer | trace level number}
| interface tengigabitethernet slot/port} }| sync | timer | trace level number}
Operands
all
Turns on all debugging.
cli
Turns on command line interface debugging.
event
Turns on event debugging.
nsm
Turns on Network Services Module (NSM) debugging.
pdu
Turns on PDU debugging.
rx all
Turns on debugging for received LACP packets on all interfaces.
rx interface
Turns on debugging for received LACP packets on the specified
interface.
interface.
interface tengigabitethernet
Specifies the 10 Gbps Ethernet interface.
slot
Specifies the slot number.
port
Specifies the port number.
tx all
Turns on debugging for transmitted LACP packets on all interfaces.
tx interface
Turns on debugging for transmitted LACP packets on the specified interface.
interface tengigabitethernet
Specifies the 10 Gbps Ethernet interface.
slot
Specifies the slot number.
port
Specifies the port number.
sync
Turns on debugging for LACP sync transitions.
timer
Turns on debugging for LACP timers.
trace level number Specifies the trace level number. The range of valid values is 1-7.
Defaults
By default, debugging is not turned on.
Command
Modes
Privileged EXEC mode
Description
Use this command to enable debugging for Link Aggregation Control Protocol (LACP). Use the no
debug command to disable debugging.
debug command to disable debugging.
Usage
Guidelines
To display debug outputs on a specific cmsh session, use the terminal monitor command.