Allied Telesis AT-CV5M02 Data Sheet
Allied Telesis
www.alliedtelesis.com
Datasheet |
Media Converters
AT-CV5M02
Converteon™ Series Management Card
Overview
The AT-CV5M02 adds management
configuration and monitoring capabilities to the
AT-CV5000 Converteon media chassis. A
chassis can be installed with any range of media
blades, which can be used in an unmanaged
mode. With the addition of a management card
to the chassis, all the blades setup option can
be configured via the management module,
allowing a network administrator to change
configuration remotely, and monitor the status
of both the chassis and the links.
configuration and monitoring capabilities to the
AT-CV5000 Converteon media chassis. A
chassis can be installed with any range of media
blades, which can be used in an unmanaged
mode. With the addition of a management card
to the chassis, all the blades setup option can
be configured via the management module,
allowing a network administrator to change
configuration remotely, and monitor the status
of both the chassis and the links.
Key Features
Chassis Management
•
For local chassis - temperature/voltage/fan
speed monitoring and reading
speed monitoring and reading
•
For remote chassis - dying gasp and 1st RPS
failure via OAM
failure via OAM
Management Interface and Administration
•
SNMP v1, v2c, v3,Telnet , Web GUI, and local
RS232 support
RS232 support
•
Integrated SNMP and IEEE OAM
management
management
•
DHCP and NTP client support
•
Broadcast Storm Protection
Management Card Redundancy
•
Support either auto or manual fast switch
over
over
•
Fast switch over design (standby card
database always consistent with active card)
database always consistent with active card)
IEEE 802.3ah OAM Remote Line Card
Management
•
Fault detection, performance monitoring, and
remote loopback
remote loopback
•
Allied Telesis organization specific events –
image download, and SFP inform retrieval
image download, and SFP inform retrieval
Line Card Management
•
Support six combo operating modes
(LT/ML/SML + OAM)
(LT/ML/SML + OAM)
•
Summary menu display all line card and ports
configurations and status brief info
configurations and status brief info
•
Enable/disable low power Eco-friendly mode
for one line card or all line cards
for one line card or all line cards
•
Firmware upgrade on a per single/multiple/all
line card basis
line card basis
•
Single image to support all CM3xx series line
cards
cards
•
Soft reset one line card or all line cards in the
chassis
chassis
Port Management
•
Port configuration and port status/statistics
display
display
•
Bandwidth allocation (ingress/egress rate
limiting)
limiting)
•
SNMP RMON statistics support
Configuration File Management
•
Management card system parameter
configuration and backup
configuration and backup
•
Line card configuration backup in management
card
card
•
Auto-copy/save line card configuration
•
Display (default/current/last saved)
configuration
configuration
•
Return line card to (default/last saved)
configuration
configuration
Alarms/Traps
•
Event logging and syslog support
•
Remote chassis dying gasp or 1st RPS failure
•
RPS voltage failure
•
Management card or line card reboot
•
Temperature threshold crossing
•
Module (RPS/FAN/line card/SFP)
insertion/removal
insertion/removal
•
SFP Digital Diagnostics Monitoring (DDM)
alarm
alarm
•
Line card port up/down and remote line card
copper port failure
copper port failure
Diagnostics
•
Display chassis and module type, MAC address,
S/N, hardware rev, software version
S/N, hardware rev, software version
•
Local line card real-time IPC message analyzer
•
Remote line card real-time OAM analyzer
•
Display SFP information and SFP DDM (Digital
Diagnostics Monitoring) information
Diagnostics Monitoring) information
* Managed local line card and port via chassis backplane IPC,
managed remote line card and port via IEEE 802.3ah OAM