Allied Telesis AT-CV5M02 Data Sheet
Allied Telesis
www.alliedtelesis.com
AT-CV5M02
| Converteon Series Management Card
Management Modes
The AT-CV5M02 supports three management
modes
modes
•
SNMP
•
Telnet
•
Local RS232
Both the local RS232 and the Telnet mode
allow the user to monitor and manage a
Converteon chassis using a menu driven, Web
GUI. When configured for SNMP, a network
administrator can not only configure the chassis,
but also receive network warnings relative to
link failures, power supply failures and
equipment being over temperature, etc.
allow the user to monitor and manage a
Converteon chassis using a menu driven, Web
GUI. When configured for SNMP, a network
administrator can not only configure the chassis,
but also receive network warnings relative to
link failures, power supply failures and
equipment being over temperature, etc.
Connection by an RS232 port is achieved by
attaching a computer or terminal to the DB-9
connector on the front panel of the
management card.Telnet and SNMP sessions
connect via the 10/100TX connection also
located on the front panel.
attaching a computer or terminal to the DB-9
connector on the front panel of the
management card.Telnet and SNMP sessions
connect via the 10/100TX connection also
located on the front panel.
In addition, each management card has six
diagnostic LEDs to aid in troubleshooting.
diagnostic LEDs to aid in troubleshooting.
IEEE 802.3ah (OAM) Remote
Management
Management
When deployed with any media blades that
support IEEE 802.3ah ‘Ethernet in the First Mile’
such as the AT-CM202, AT-CM2K0S, AT-CM3xx,
and AT-CM70S modules, the AT-CV5M02
management card can also manage and monitor
the remote blades connected only to the local
chassis over fiber optics.
support IEEE 802.3ah ‘Ethernet in the First Mile’
such as the AT-CM202, AT-CM2K0S, AT-CM3xx,
and AT-CM70S modules, the AT-CV5M02
management card can also manage and monitor
the remote blades connected only to the local
chassis over fiber optics.
Hassle Free Support
All Allied Telesis Ethernet media converter line
cards have free technical support, ensuring
trouble-free installation.
cards have free technical support, ensuring
trouble-free installation.
Technical Specifications
Status Indicators
LED State Description
PWR
Green
The CPM card is receiving power
OFF
The CPM card is not receiving power
RDY
Green
The CPM card has passed diagnostics
and is ready
and is ready
OFF
The CPM card has failed diagnostics
and is not ready
and is not ready
FLT
Red
The CPM card has experienced fault
condition
condition
OFF
The CPM card has reported no fault
condition
condition
LK
Green
Link established on the card Ethernet
port
port
OFF
No link established on the card
Ethernet port
Ethernet port
AT
Flashing TX/RX activity established on the
card Ethernet port
OFF
No activity established on the card
Ethernet port
Ethernet port
FD
Green The CPM card is operating in
full-duplex mode
OFF
The CPM card is operating in
half-duplex mode
half-duplex mode
Connectors
RS232
Female DB-9
Baud speed 1200 ~ 115200bps
Baud speed 1200 ~ 115200bps
Ethernet 10/100TX, auto MDI/MDI-X
Management Features
Management Interfaces
RS232 (Local Login): Username and Password
protected (Enable/Disable Local
Login)
Login)
Telnet (Remote Login): Username and Password
protected (Enable/Disable Remote
Login)
Login)
SNMP Managers:
Named SNMP Manager
(Enable/Disable SNMP)
(Up to 4 SNMP manager)
(Enable/Disable SNMP)
(Up to 4 SNMP manager)
DHCP
DHCP client (Enable/Disable)
System Warnings
Over temperature warning
PSU failure warning
Fan failure warnings
Line card failure
Insert/Remove Power Supply
Insert/Remove fan module
Insert/Remove line card
PSU failure warning
Fan failure warnings
Line card failure
Insert/Remove Power Supply
Insert/Remove fan module
Insert/Remove line card
Operational Warnings
Link Up/Down
Event Logging
Time and date stamp for all log entries
Internal log
Syslog
Internal log
Syslog
Administration
Diagnostics
Firmware upgrade (management card)
Firmware upgrade (line card firmware)
Configure MissingLink
Firmware upgrade (management card)
Firmware upgrade (line card firmware)
Configure MissingLink
TM
Configure Smart MissingLink
TM
Configure link monitor
Configure IEEE 802.3ah OAM
Web GUI interface
Management card redundancy
Multiple local and remote line card image download
Local and remote line card configuration backup in
Configure IEEE 802.3ah OAM
Web GUI interface
Management card redundancy
Multiple local and remote line card image download
Local and remote line card configuration backup in
management card
Auto-copy line card configuration
Local and remote line card port flow control
Support NTP client
Broadcast Storm Protection
Local and remote line card port flow control
Support NTP client
Broadcast Storm Protection
Physical Specifications
Dimensions
2.2cm x 7.3cm x 13cm
(H x W x L)
(.855” x 2.89” x 5.10”)
Weight:
0.60 lbs
0.27 kg
0.27 kg
Package Contents
One AT-CV5M02 CPM card
One DB-9 RS-232 serial cable
Installation guide
Warranty card
One DB-9 RS-232 serial cable
Installation guide
Warranty card