Brother HL-1110 User Manual

General Information 

Power On/Off key has the following functions:



Power Off

Make sure that the machine is in the Ready mode, then hold down 

 for about 2 seconds. All the LEDs 

turn off when you enable the Power Off mode. For details about Power Off mode, see Power Off mode 
on page 44.



Cancel printing

Cancel the current job being printed: Press and hold 

 for about 2 seconds until all the LEDs light up 

and then release it. The machine will then eject the paper. The Error LED ( ) and Ready LED ( ) will light 
up alternately.
Cancel all the received jobs: To delete all jobs, cancel the current job first following the procedure above. 

While all the LEDs light up, press 

 again. All the LEDs will blink as the job(s) is being canceled.



Error recovery
If there is an error, the machine will recover automatically from some errors. If an error is not automatically 

cleared, press 

 to clear the error, and then continue to use the machine.



Form feed

If the Ready LED ( ) blinks for a long time, press 

. The machine will print any data that is left in the 

machine’s memory.