Brother HL-1110 사용자 설명서
General Information
41
3
Power On/Off key
3
Power On/Off key has the following functions:
Power Off
Make sure that the machine is in the Ready mode, then hold down
for about 2 seconds. All the LEDs
turn off when you enable the Power Off mode. For details about Power Off mode, see Power Off mode
on page 44.
on page 44.
Cancel printing
Cancel the current job being printed: Press and hold
for about 2 seconds until all the LEDs light up
and then release it. The machine will then eject the paper. The Error LED ( ) and Ready LED ( ) will light
up alternately.
Cancel all the received jobs: To delete all jobs, cancel the current job first following the procedure above.
up alternately.
Cancel all the received jobs: To delete all jobs, cancel the current job first following the procedure above.
While all the LEDs light up, press
again. All the LEDs will blink as the job(s) is being canceled.
Error recovery
If there is an error, the machine will recover automatically from some errors. If an error is not automatically
If there is an error, the machine will recover automatically from some errors. If an error is not automatically
cleared, press
to clear the error, and then continue to use the machine.
Form feed
If the Ready LED ( ) blinks for a long time, press
. The machine will print any data that is left in the
machine’s memory.