GE Calibur CBR-PB3-WD User Manual

Kalatel CBR-PB3-WD                    26                                0150-0261A 

10 HyperTerminal Setup 

Manual configuration can also be completed using Windows HyperTerminal in 
lieu of the dipswitches.  Manual configuration should only be used if the “POS 
Device Selection” does not conform to your specific device because baud 
rates or protocols are slightly different than the default values for the selected 
device. 

 

10.1 Equipment Required 

q 

(1) Windows 98/NT/2000/XP Desktop or Laptop PC. 

q 

(1) DB9F to RJ45 cable (included with your unit).

 

 

Configuration using Windows HyperTerminal uses 
the supplied RJ45-to-DB9 cable provided with 
your unit.  Disconnect the PB3 unit from the 
DVMRe and hook-up the cable as follows: 

 

The RJ45 end connects to the outside receptacle 
of Port 1 of the PB3 unit and the DB9 end 
connects to your PC’s COM Port (typically 
COM1).

 

 

 

 

 

 

 

 

 

NOTE