Brother P-touch PT-2700 Quick Setup Guide

1

2

3

4

5

6

7

8

9

z

Power Supply

Connect the AC adapter directly to the P-touch labeler.

Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V 
on the P-touch labeler.

Insert the AC adapter plug into a standard electrical outlet.

• Turn the P-touch labeler off before disconnecting the AC adapter.
• Disconnect the AC adapter from the P-touch labeler and electrical outlet when you do not 

intend to use the P-touch labeler for an extended period.

• Do not pull or bend the AC adapter cord.
• Use only the AC adapter (AD-60) designed exclusively for your P-touch labeler. Failure to 

observe this may result in an accident or damage. Brother shall not assume any responsibility 
for any accident or damage resulting from not using the specified AC adapter.

• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this may 

result in an accident or damage. Brother shall not assume any responsibility for any accident 
or damage resulting from not using a standard electrical outlet.

• When power is disconnected for more than two minutes, all text and format settings will be 

cleared. Any text files stored in the memory and clock settings will also be cleared.

For backup of memory and clock setting, when the AC adapter is unplugged, please use 
AA-size alkaline batteries (LR6).