Brother P-touch PT-2700 Quick Setup Guide
18
Inserting a Tape Cassette
GETTING STARTED
Tape cassettes of 9/64", 1/4", 3/8", 1/2", 3/4", or 1" (3.5mm, 6mm, 9mm, 12mm, 18mm,
or 24mm) width can be used in your P-touch labeler. Use only Brother tape cassettes
with the
or 24mm) width can be used in your P-touch labeler. Use only Brother tape cassettes
with the
mark.
Check that the end of the tape is not bent and
that it passes through the tape guide.
that it passes through the tape guide.
After making sure that the power is off, lift open the
tape compartment cover. If there is already a tape
cassette in the machine, remove it by pulling it
straight up.
tape compartment cover. If there is already a tape
cassette in the machine, remove it by pulling it
straight up.
Insert the tape cassette into the tape
compartment, with the end of the tape
facing the machine's tape exit slot, and
press firmly until you hear a click.
compartment, with the end of the tape
facing the machine's tape exit slot, and
press firmly until you hear a click.
Inserting a Tape Cassette
If the new tape cassette has a cardboard stopper, be sure to remove
the stopper before inserting the cassette.
the stopper before inserting the cassette.
WATNLA
TION
End of tape
Tape guide
1
2
When inserting the tape cassette,
make sure that the tape and ink
ribbon do not catch on the print head.
make sure that the tape and ink
ribbon do not catch on the print head.
Tape exit slot
3