Brother MFC-4300 Owner's Manual

      S E T U P   S E N D

When you send a fax you can choose any 
combination of the available settings:  Add 
a coverpage and select a comment; set the 
contrast or resolution; send using overseas 
mode, call reservation or delayed fax timer, 
polling transmission or real time transmission. After each function is accepted, 
the LCD will ask if you want to enter other settings: 

Press 

 if you want to select additional settings. The LCD returns to the SETUP 

SEND menu—OR—
Press 

 if you are finished choosing settings, and then go to the next step.

■

Documents must be between 5.8 and 8.5 inches wide, and 3.9 and 14.1 inches 
long. Your MFC can scan an image only 8.2 inches wide, regardless of how 
wide the paper.

■

Make sure you place 
original face down, top 
edge first.

■

Adjust the paper guides 
to fit the width of your 
document.

■

The ADF (automatic document feeder) can hold up to 20 pages, feeding each 
one individually through the fax machine. Use standard (17 lb–24 lb) paper 
when using the ADF. If you’re using heavier paper, feed each sheet individually 
to prevent paper jams.

■

Press 

 (before you send the fax) to select the resolution for the 

■

Make sure documents written in ink are completely dry.

DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, 
paper clips, paste or tape attached. DO NOT use cardboard, newspaper or 
fabric.

ACCEPTED

OTHER SETTINGS?
1.YES 2.NO