Bosch Appliances Home Security System D7412G User Manual

D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN

EN | 59

Bosch Security Systems | 1/04 | 47775E

2.11.3

Authority Level Selections

Use Section 2.11.3 Authority Level Selections to
determine which Authority Level can access
command center functions that are Passcode
Protected. You do not need to select 

Enable items

in the Authority Level section if the command
center function is disabled or enabled. There are two
selections you can use for each individual function
for the authority level you are programming.

Press the [SPACE] bar to scroll through the
selections. Press [ENTER] when the correct selection
appears in the display.

Table 26: Authority Level Selections

Authority Level

Description

Blank

Disabled: This function is not
authorized for the user who is
assigned this authority level.

E

Enabled: This function is authorized
for the user who is assigned this
authority level.

Default:

1

Selection:

1 to 14

Enter the number of the authority level you want to
program. Authority Level 15 (Service Passcode)
cannot be edited.

Default:

See 

Program Record Sheet

Selection:

Blank or E

#1 Disarm

Use the disarming function to disarm areas that are
master armed or perimeter armed. If enabled, the
following disarming choices are available to the user
with this authority.

DISARM ALL: Disarms all areas within the 

CC#

Scope

 of the command center being used by

accessing the Function Menu and the authority level
of the user performing the function.

DISARM AREA: Disarms only the displayed area.

0101
0101
0101

There are many options available for
arming and disarming. This depends on A#
Area Type and CC# Scope. Read the
definitions of area type in Section 2.9 Area
Parameters and CC# Scope in Section
2.10.1 Cmd Cntr (Command Center)
Assignment.

Default:

See 

Program Record Sheet

Selection:

Blank or E

#2 Master Arm Delay [COMMAND][1]

Master arms areas based on the 

CC# Scope

 of the

command center using an exit delay time.

When this item is accessed through the Function
List, Master Arm All allows the user to arm all areas
according to the authority level of the user and
within the 

CC# Scope

 of the command center using

an exit delay time.

Arm Area arms only the area displayed.

If COMMAND 1 is used, it arms only the area
where the command center is assigned.

Default:

See 

Program Record Sheet

Selection:

Blank or E

#3 Master Arm Instant [COMMAND][1][1]

When this item is accessed through the Function
List, Master Arm Inst allows the user to arm all areas
according to the user’s authority level and within the

CC# Scope

 of the command center being used

without an exit delay time by accessing the Function
Menu.

Arm Area arms only the area to which the
command center is assigned.

If COMMAND 11 is used, it arms only the area
where the command center is assigned.

Use COMMAND 11 carefully because all
Perimeter and Interior points become
Instant Armed.