Bosch Appliances Home Security System D7412G User Manual

D9412G/D7412G | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2

EN | 76

Bosch Security Systems | 1/04 | 47775E

0101
0101
0101

Converting hexadecimal to decimal: If
your card label contains letters as well as
numbers, the number is hexadecimal.*
Convert the hexadecimal number to
decimal using your calculator. If you cannot
convert in this way, use the reader and the
Add/Chg User? Function to add the
tokens/cards.

Perform the following test to confirm you
can convert properly:

Use 319EB0 as the hexadecimal number.
On your calculator, press [HEX]. Enter all
the hexadecimal characters into the
calculator. Press [DEC] and your
hexadecimal characters convert to the
following eight digits: 03251888. The site
number is 032.  Enter it in U### Mstr
Site. Your card data is 51888. Enter it into
U### Mstr C/D.

*  A hexadecimal number can contain all

numerals. If the code does not work try
converting the number from
hexadecimal to decimal.

Always tag your tokens before adding
them to the system so you do not mix them
up. Use the CRD ID ###-# number to
index them.

Default:

Blank

Selection:

00000 = (0) to 65534 or Blank (65535)

Master User ### Card Data

Enter the remaining five decimal numbers on the
back of the token/card. This is the second and third
byte (bits 10 through 25) of data for a 26-bit
Wiegand card. This is called the card data.

You must program 

U### Mstr Site

 before

programming this prompt.

Default:

Blank

Selection:

000 = (0) to 254 or Blank (255)

Sub-users one through three Site Data.

Default:

Blank

Selection:

00000 = (0) to 655354 or Blank
(65535)

Sub-users one through three card data.