Bosch Appliances Home Security System D7412G User Manual
D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS
EN | 77
Bosch Security Systems | 1/04 | 47775E
4.0
RADXPNTS
4.1
Point Index
Use this programming module to construct
personality types for points used in the system. The
Index numbers are used in Point Assignments. Each
unique point index number determines the control
panel’s responses to specific conditions occurring on
the Protective points.
personality types for points used in the system. The
Index numbers are used in Point Assignments. Each
unique point index number determines the control
panel’s responses to specific conditions occurring on
the Protective points.
The NEW RECORD program contains default
entries and descriptions that match RPS defaults for
point indexes. See the D9412G/D7412G Program
Record Sheet for defaults.
entries and descriptions that match RPS defaults for
point indexes. See the D9412G/D7412G Program
Record Sheet for defaults.
Point Index
Default:
1
Selection:
1 to 31
The number of the point personality you are
programming. You can define up to 31 individual
personalities.
programming. You can define up to 31 individual
personalities.
P## Type
Default:
See
Program Record Sheet
Selection:
0 to 9
P ##
Type
Type
Description
0
24-hour: A 24-hour point is not turned on and off from a command center. 24-hour points are
armed all the time, and can be used for fire protection (see the
armed all the time, and can be used for fire protection (see the
P ## Fire Point
prompt in Section
4.1.1 Point Responses), panic, medical, and police alerts.
24-hour points can be programmed as bypassable. Consider the application carefully before using
the bypassable option. Bypassable 24-hour points should be programmed to Buzz on Fault.
the bypassable option. Bypassable 24-hour points should be programmed to Buzz on Fault.
When a 24-hour point is bypassed, send the report as it occurs. If the area contains all 24-hour
points, the area is never armed or disarmed. A Deferred Bypass Report is not sent.
points, the area is never armed or disarmed. A Deferred Bypass Report is not sent.
24-hour protection for fire doors, roof hatches, and so on. Instead of programming this type of
protection as a 24-hour point, consider using a Perimeter point type with a Point Response of 9 to E.
24-hour points do not show faults when an arming function is entered, but Perimeter points do.
When programming this type of protection, consider also using the Buzz on Fault and Local While
Disarmed options.
protection as a 24-hour point, consider using a Perimeter point type with a Point Response of 9 to E.
24-hour points do not show faults when an arming function is entered, but Perimeter points do.
When programming this type of protection, consider also using the Buzz on Fault and Local While
Disarmed options.
1
Perimeter: Perimeter points are armed with all Arming functions. Points programmed as perimeter
can also be armed as a group (using Perimeter-Arming functions) separately from points
programmed as interior. This lets the user partially arm the system to establish Perimeter protection
while occupying the interior of the protected premises.
can also be armed as a group (using Perimeter-Arming functions) separately from points
programmed as interior. This lets the user partially arm the system to establish Perimeter protection
while occupying the interior of the protected premises.
Perimeter points can be programmed to initiate entry delay time. If the point initiates entry delay, it
can also initiate an entry tone.
can also initiate an entry tone.
When a Perimeter point is programmed for entry delay, entry delay time is always provided. If the
area is in entry delay when a second Perimeter point trips, the control panel compares the remaining
entry delay time to the time programmed for the second Perimeter point. If the second Perimeter
point’s entry delay time is less than the remaining time, it shortens the entry delay time.
area is in entry delay when a second Perimeter point trips, the control panel compares the remaining
entry delay time to the time programmed for the second Perimeter point. If the second Perimeter
point’s entry delay time is less than the remaining time, it shortens the entry delay time.
Perimeter points programmed for an instant point response, generate an alarm immediately when
tripped, even during entry or exit delay.
tripped, even during entry or exit delay.