Bosch Appliances Home Security System D7412G User Manual
D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS
EN | 81
Bosch Security Systems | 1/04 | 47775E
4.1.1
Point Responses
Applications for Point Responses 9, D,
and E:
and E:
Combine Point Responses 9, D, and E with
Perimeter point types to create more flexible
24-hour protection. Unlike 24-hour points, a
faulted Perimeter point with a Point
Response of D and E displays at the
command center when arming. Like a 24-
hour point, a point programmed this way can
generate alarms whether the area is armed
or disarmed.
Perimeter point types to create more flexible
24-hour protection. Unlike 24-hour points, a
faulted Perimeter point with a Point
Response of D and E displays at the
command center when arming. Like a 24-
hour point, a point programmed this way can
generate alarms whether the area is armed
or disarmed.
Combining Point Response 9 with the Local
While Disarmed feature provides off-site
reporting when the area is armed, but only
local alarm annunciation when the area is
disarmed.
While Disarmed feature provides off-site
reporting when the area is armed, but only
local alarm annunciation when the area is
disarmed.
Combining Point Response 9 with the Local
While Armed feature provides off-site
reporting when the area is disarmed, but
only local alarm annunciation when the area
is armed.
While Armed feature provides off-site
reporting when the area is disarmed, but
only local alarm annunciation when the area
is armed.
Point Response E: Use this for Zonex/Asic
motion detectors. The control panel can
report troubles while Master Armed.
motion detectors. The control panel can
report troubles while Master Armed.
Point Response F: Does not sound at local
command centers but activates RlyResp
Type 1 and command center faults. To
annunciate the off-normal state at a
command center, program Disp as Dvc as
Yes and/or BuzzOn Fault as 1 or 2. This
point response does not generate alarms or
activate an alarm relay.
command centers but activates RlyResp
Type 1 and command center faults. To
annunciate the off-normal state at a
command center, program Disp as Dvc as
Yes and/or BuzzOn Fault as 1 or 2. This
point response does not generate alarms or
activate an alarm relay.
Point Response 8, 9, A, B, and C provide
supervisory (24-hour) reporting.
supervisory (24-hour) reporting.
Characteristics of a Fire Point:
Reporting: When a group of events occur,
the control panel routes and prints out Fire
Reports first.
the control panel routes and prints out Fire
Reports first.
Visual Annunciation: Fire troubles continue
to scroll until the trouble is cleared. Once
acknowledged,
to scroll until the trouble is cleared. Once
acknowledged,
FIRE TROUBLE
scrolls to
let the end user know that a Fire point, or
group of Fire points, is still in trouble. Panel-
Wide Relays, Summary Fire, and
Summary Fire Tbl activate if a relay is
assigned when any Fire point goes into
alarm or is in trouble.
group of Fire points, is still in trouble. Panel-
Wide Relays, Summary Fire, and
Summary Fire Tbl activate if a relay is
assigned when any Fire point goes into
alarm or is in trouble.
Audible Annunciation: A Fire point
activates the A# Fire Bell relay
programmed in Relay Parameters. The
amount of time and pattern of the relay
activation is programmed by area in Bell
Parameters, A# Fire Time, and A# Fire
Pat.
activates the A# Fire Bell relay
programmed in Relay Parameters. The
amount of time and pattern of the relay
activation is programmed by area in Bell
Parameters, A# Fire Time, and A# Fire
Pat.
Supervisory: A Fire point can send a Fire
Supervisory Report and activate the
Summary Fire, Sup and Summary Fire
Tbl, Panel-Wide Relays with a P##
Response of 8-9-A-B-C.
Supervisory Report and activate the
Summary Fire, Sup and Summary Fire
Tbl, Panel-Wide Relays with a P##
Response of 8-9-A-B-C.
Alarm Verification: A Fire point can delay
an alarm by the time programmed in A#
Verify Time in the Area Parameters.
Combined with A# Resettable, a Fire point
also resets the electrical circuit for the verify
time amount.
an alarm by the time programmed in A#
Verify Time in the Area Parameters.
Combined with A# Resettable, a Fire point
also resets the electrical circuit for the verify
time amount.
Reset Sensor: A fire device that requires
resetting can be manually reset using the
reset sensor relay for the area it is assigned
to.
resetting can be manually reset using the
reset sensor relay for the area it is assigned
to.
Fire Walk: Use the Fire Walk function to
test Fire points in the system.
test Fire points in the system.
To provide an audible tone for a restored
Fire Supervisory point, use P## RlyResp
Type 1 and connect to a graphic
annunciator.
Fire Supervisory point, use P## RlyResp
Type 1 and connect to a graphic
annunciator.