Bosch Appliances Home Security System D7412G User Manual
D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS
EN | 94
Bosch Security Systems | 1/04 | 47775E
4.3
COMMAND 7 and COMMAND 9
These entries assign point indexes, BFSK report
code, BFSK relay that trips, and the text for the
COMMAND 7 and COMMAND 9 command
center functions.
code, BFSK relay that trips, and the text for the
COMMAND 7 and COMMAND 9 command
center functions.
CMD7 Point Index
Default:
31
Selection:
Blank (00) to 31
This entry selects one of the 31
P## Index
codes
that define how the control panel reacts when a
COMMAND 7 is initiated.
COMMAND 7 is initiated.
0101
0101
0101
0101
0101
The point index code used for COMMAND
7 must not be used for any other points on
the system.
7 must not be used for any other points on
the system.
If the point index for COMMAND 7 has
Fire points programmed Yes, this causes
access control doors to unlock if Fire
Unlock is also programmed Yes (see the
D9210B Program Entry Guide).
Fire points programmed Yes, this causes
access control doors to unlock if Fire
Unlock is also programmed Yes (see the
D9210B Program Entry Guide).
CMD7 BFSK/Relay
Default:
1
Selection:
0 to 9
Selects one of the digits shown for reporting in BFSK
or for activating relays 73 to 80 (on the D9412G) or
relays 9 to 16 (for the D7412G) when COMMAND
7 is initiated (see the
or for activating relays 73 to 80 (on the D9412G) or
relays 9 to 16 (for the D7412G) when COMMAND
7 is initiated (see the
P### BFSK/Relay
prompt in
Section 4.2 Point Assignments).
COMMAND 7 does not activate the
Summary Fire Alarm relay.
Summary Fire Alarm relay.
CMD7 Point Text
Default:
[COMMAND][7]
Selection:
Up to sixteen alphanumeric
characters
characters
Enter alphabetic characters A to Z in capital letters
Enter up to sixteen characters of text to describe the
point. This point text is displayed at command
centers (if the point is programmed as visible) and
reported to the D6500/D6600 when transmitting in
Radionics’ Modem IIIa
point. This point text is displayed at command
centers (if the point is programmed as visible) and
reported to the D6500/D6600 when transmitting in
Radionics’ Modem IIIa
2
format (if it is a reporting
point).
CMD9 Point Index
Default:
31
Selection:
Blank (00) to 31
This entry selects one of the 31
P## Index
codes
that define how the control panel reacts when a
COMMAND 9 is initiated.
COMMAND 9 is initiated.
0101
0101
0101
0101
0101
The point index code used for COMMAND
9 must not be used for any other points on
the system.
9 must not be used for any other points on
the system.
If the point index for COMMAND 9 has
Fire points programmed as Yes, this
causes access control doors to unlock if
Fire Unlock is also programmed Yes (see
the D9210B Program Entry Guide).
Fire points programmed as Yes, this
causes access control doors to unlock if
Fire Unlock is also programmed Yes (see
the D9210B Program Entry Guide).
CMD9 BFSK/Relay
Default:
1
Selection:
0 to 9
This entry selects one of the digits shown for
reporting in BFSK or for activating relays 73 to 80
(on the D9412G) or relays 9 to 16 (for the D7412G)
when a COMMAND 9 is initiated (see the
reporting in BFSK or for activating relays 73 to 80
(on the D9412G) or relays 9 to 16 (for the D7412G)
when a COMMAND 9 is initiated (see the
P###
BFSK/Relay
prompt in Section 4.2 Point Assignments).
COMMAND 9 does not activate the
Summary Fire Alarm relay.
Summary Fire Alarm relay.
CMD9 Point Text
Default:
[COMMAND][9]
Selection:
Up to sixteen alphanumeric
characters
characters
Enter alphabetic characters (A to Z) in capital letters
Enter up to sixteen characters of text to describe the
point. This point text is displayed at command
centers (if the point is programmed as visible) and
reported to the D6500/D6600 when transmitting in
Radionics’ Modem IIIa
point. This point text is displayed at command
centers (if the point is programmed as visible) and
reported to the D6500/D6600 when transmitting in
Radionics’ Modem IIIa
2
format (if it is a reporting
point).