White Rodgers F145RF-1600 Wireless Remote Thermostat Sensor Installation Instruction
3
CONFIRM WIRELESS DEVICES ARE COMMUNICATING
3
Press the Next button once, RS-
1 (Remote sensor) should
be displayed if a remote sensor is installed. Temperature
displayed is the temperature at the remote sensor. Press
Next again to confirm additional sensor(s) RS-
displayed is the temperature at the remote sensor. Press
Next again to confirm additional sensor(s) RS-
2, RS-3,
ORS-
4 (outdoor), RAS.
Equipment Control
(Required)
Sensor Number
Remote Sensor
1 (if installed)
Remote Sensor
2 (if installed)
Outdoor Remote Sensor (if installed)
Remote Sensor
3 (if installed)
Return Air Sensor (required)
4
Press the Run button to return to Home screen.
2
Press the Connect button once and release. Comfort
Interface display will indicate “Searching” until (CTL)
control and wireless icon are found. If no communication,
it will show “Failed.”
control and wireless icon are found. If no communication,
it will show “Failed.”
(see Troubleshooting below)
NOTE
Battery icon
(
)
shows battery
status for each remote.
1
At the Comfort Interface, press the Menu button once and
release.