Bosch Appliances Computer Hardware DVA-08K User Manual

en | Subsystem Maintenance

RAID Subsystem DVA-08K | Installation Manual

F.01U.027.797 | V2 | 2008.08

Bosch Security Systems

Push Back the Module Clips on the Sides of the DIMM Socket

3.

Gently retrieve the DIMM module out of the DIMM socket. (See Figure 6.2)

4.

Insert the DIMM module into the DIMM socket. Align the DIMM module with the DIMM 

socket. Once aligned, gently push the DIMM module into the socket. The white clips on 

the sides of the socket will close automatically and secure the DIMM module into the 

socket. 

Insert the DIMM Module

5.

Reinstall the controller module. After the DIMM module has been properly installed, the 

controller module must be reinstalled. To do this, align the controller module with the 

controller module bay. Then gently push the controller module in the controller bay. 

Carefully push the controller until you feel the contact when the board edge connectors 

are mated to the backplane. Do not use force. If unusual contact resistance is felt, try it 

again. Next secure the controller module into the subsystem by fastening the hand 

screws on the sides. 

When replacing a DIMM, the whole subsystem needs to be powered down. Therefore, when 

replacing a DIMM, you should carefully select the time when the replacement will be made in 

order to minimize the overall disruption to service.