Wagner SprayTech 9140S User Manual

15

English

1. Lock the gun and remove spray tip assembly.  Submerge

suction set into a bucket with appropriate cleaning
solution.

2. Place a waste container next to the original material

container.   Aim the spray gun into the side of the 

material container and hold the trigger.

3. While pulling the gun trigger, turn the pump ON 

(l), and turn

the PRIME/ SPRAY knob to SPRAY to purge material from
the hose back into the original container.  

• Hold trigger

• Turn pump ON (l)

• Turn PRIME/SPRAY knob to SPRAY

Containers should

be touching

Hold trigger

4. When cleaning solution flows from the spray gun, keep

holding the trigger and aim the spray gun into the side of the
waste container 

5. Trigger the gun until the fluid flowing out of the gun is

clear.  You may need to dispose and obtain new cleaning
solution.

6. Turn the PRIME/SPRAY knob to PRIME and trigger gun

to relieve pressure.

Hold

trigg

er