Sony Water Dispenser 2 User Manual

Page of 362
  
 Chapt
er
 16
 
Eng
inee
ring
 S
e
tu
p
242
Setup Relating to Switcher Processor
4
Press [Set] to confirm the assignment.
Selecting the output signal to which settings apply
In the following video clip adjustment, vertical blanking interval adjustment 
and through mode setting, and safe title setting, use either of the following 
methods to select the output signal before making the setting.
• Press directly on the list in the status area.
• Press the arrow keys to move the reverse video cursor.
The selected output signal appears in reverse video.
Adjusting the video clip
To adjust the clip value for each of the output signals from the Output 1 to 48 
ports, use the following procedure.
1
In the Switcher>Output menu, press [Video Clip].
The Video Clip menu appears.
The status area shows the output ports and assigned signals, and the white 
clip, dark clip, and chrominance clip values.
2
Adjust the following parameters.
To set the values to the default values, press [Default].
Making vertical blanking interval adjustment and through mode 
settings
Use the following procedure.
1
In the Switcher>Output menu, press [V Blank/Through].
The V Blank/Through menu appears.
The status area shows the output ports and the assigned signals, the vertical 
blanking interval, and the through mode Enable/Disable status.
Knob
Parameter
Adjustment
Setting values
1
White Clip
Luminance signal white clip value
90.00 to 109.02
2
Dark Clip
Luminance signal dark clip value
6.85 to +10.00
3
Chroma Clip
Chrominance signal clip value
90.00 to 113.17