Sony Water Dispenser 2 User Manual

  

 Chapt

er

 16

 

Eng

inee

ring
 S
e

tu

p

250

Setup Relating to Switcher Processor

Press [Link Bus Select].

The Link Bus Select menu appears.
The status area lists the current setting status of the selected link and the 
buses that can be selected.

In the <Bus Select> group, select [Master Bus] (link source bus).

Using any of the following methods, select the bus to be the link source, 
and press [Bus Set].

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.

a)

Only when [Master Bus] is selected, 115 (M/E-1 Trans PGM), 116 (M/
E-2 Trans PGM), 117 (M/E-3 Trans PGM), and 118 (P/P Trans PGM) 
are available. When [Linked Bus] is selected, 115 to 118 are not 
available.

With one of 113 to 116 selected for [Master Bus], linking is carried out 
as soon as you start moving the fader lever.

In the <Bus Select> group, select [Linked Bus] (link destination bus).

Referring to step 

, select the bus to be the link destination, and press [Bus 

Set].

Turn the knob to select the link table, and press [Link Table Set].

The status area reflects the current setting status.

To delete a link
Select the link you want to delete, then press [Clear] in the Internal Bus Link 
menu.

Use the following procedure.

2

No

Bus selection

1 to 118 

a)

3

Link Table No

Link table selection

1 to 8