Sony PCS-G70 User Manual

Page of 236
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\03OVR.FM
masterpage:Left
35
Setting Up the System for the First Time — Initial Setup Wizard
9
Enter the sub-addresses.
Only numbers are available for a sub-
address. 
When you use one ISDN line, enter the 
same number both in the A1 and A2 text 
boxes (except for the USA and Canada).
When you use the PCSA-B384S ISDN 
unit and connect 2 or 3 ISDN lines, enter 
the sub-addresses in the B1 to C2 text 
boxes in addition to the A1 and A2 boxes. 
When you use the PCSA-B768S and 
connect 2 to 6 ISDN lines, enter the sub-
addresses in the B1 to F2 text boxes in 
addition to the A1 and A2 boxes. To open 
the menu with these text boxes, select 
“Next”, then press the PUSH ENTER 
button. 
When you use the PCSA-PRI, Ch1 to Ch23 
(T1), or Ch1 to Ch30 (E1) are displayed. 
Enter the telephone numbers according to 
the number of channels you will use.
10
Use the 
V, v, B or b button to select 
“Next”, then press the PUSH ENTER 
button.
The message window for confirmation 
appears.
11
Set the following items on the LAN.
DHCP Mode
Sets the DHCP (Dynamic Host 
Configuration Protocol).
Auto: Automatically assigns your IP 
address, network mask, gateway 
address and DNS address.
Off: Deactivates DHCP. In this case set 
your IP address, network mask, 
gateway address and DNS address 
manually.
Host Name
Enter your host name.
IP Address
Enter your IP address.
Network Mask
Enter your network mask.
Gateway Address
Enter your default gateway address.
DNS Address
Enter your DNS (Domain Name 
System) server address.
When you set “DHCP Mode” to “Auto”, 
the assigned IP address is shown in the 
launcher menu (page 75) or Information 
menu (page 67).
If you do not know how to set up the LAN 
configuration, contact your network 
administrator.
Note
Sub Address
A2:
A1:
B1:
B2:
C1:
C2:
ISDN Setup Wizard
Next
Previous
Cancel
Note
DHCP Mode
Off
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
LAN Setup Wizard
Next
Previous
Cancel