Yorkville FH1W Owner's Manual

w w w . y o r k v i l l e . c o m

Yorkville Sound

550 Granite Court

Pickering, Ontario

L1W-3Y8 CANADA

Canada

Voice: (905) 837-8481

Fax: (905) 837-8746

Yorkville Sound Inc.

4625 Witmer Industrial Estate

Niagara Falls, New York

14305 USA

U.S.A.

Voice: (716) 297-2920

Fax: (716) 297-3689

rin

Step 3

Attaching Brackets to Enclosures. Secure the assembled FH1 bracket to the tops of the

neighboring enclosures using the four bolts provided. Tighten bolts in an alternating,

diagonal pattern. Tightening each bolt gradually until all are firmly secured.

Tip: To assure that the bolts do not come loose over time, use a bolt threadlocker (ex. Locktite™,

Permabond™, or Sur-Lok™ brands). This will help ensure the bolt will be locked in place.

After the FH1 top bracket has successfully been mounted on the enclosures, lay

the cabinets on their backs to access the bottoms. Using the supplied Support

Plates, bolt them securely together using the same diagonal pattern as you used

tightening the top bolts.

Step 4

Using Shackles. When the array is in the upright position, a shackle must be used to

fly the array. The multi-pattern holes were designed to give maximum flexibility when

angling the array.

Note: The furthest back hole, in the center of the U-Bracket can be used to achieve the greatest amount

of downward tilt. If even greater tilt is desired, optional 3/8-inch eyebolts may be used as a pullback on the

rear of the cabinets.

Repeat steps as necessary if more than two cabinets need to be arrayed together

in one cluster.

Flyware Bracket System

FIGURE 3a

FIGURE 3b

FIGURE 3c

FIGURE4