Yamaha DVD Player DVD-S2700 User Manual

■ HDMI jack <A>

HDMI (High-Definition Multimedia Interface) provides 
high quality digital audio and video on a single 
connection. Connect HDMI jack of this unit to the HDMI 
input jack of your AV receiver, and then to that of your TV 
using a commercially available HDMI cable. 
If your receiver does not have HDMI output jack, you can 
achieve a better video image by connecting HDMI jack of 
this unit directly to the HDMI input jack of your TV.

• To output HDMI signals, set the HDMI mode to “on” by 

pressing HDMI button on the remote control.

• You can use an HDMI-DVI converter cable in order to connect 

this unit to HDCP-compatible DVI-D components. In this case, 
you need to use another audio connection in addition to this 
connection because no audio signals are output.

■ Composite video jack <B>

Connect VIDEO OUT (VIDEO) jack of this unit to the 
video input jack of your AV receiver, and then to that of 
your TV using the supplied video pin cable.

■ S-video jack <C>

S-video connections achieve a clearer picture than 
composite video connections by transmitting video signals 
on separate wires for luminance (Y) and chrominance (C). 
Connect VIDEO OUT (S VIDEO) jack of this unit to 
S-video input jack of your AV receiver, and then to that of 
your TV using a commercially available S-video cable.

■ Component video jacks <D>

Component video connections achieve higher fidelity 
color reproduction than S-video connections by 
transmitting video signals on separate wires for luminance 
(Y: green) and chrominance (P

B

: blue, P

R

: red). Connect 

VIDEO OUT (COMPONENT) jacks of this unit to the 
component input jacks of your AV receiver, and then to 
those of your TV using a commercially available 
component cable. Observe the color of each jack when 
you make connections. 
If your receiver does not have component output jacks, 
you can achieve a better video image by connecting the 
component output jacks of this unit directly to the 
component input jacks of your TV.

■ SCART terminal <E> 

If your TV has only a terminal for video input, you can 
connect the TV directly to this unit.
Connect AV terminal of this unit to SCART input terminal 
of your TV using a commercially available SCART cable.

• Ensure that the “TV” indication on SCART cable is connected 

to the TV set and “DVD” indication on SCART cable is 
connected to this unit.

After all other connections are complete, plug the supplied 
power cable into MAINS of this unit and then plug the 
power cable to an AC outlet.