Yamaha DVD Player DVD-S2700 User Manual

Press the 

part and slide the battery 

compartment cover off.

Insert the two supplied batteries (AAA, R03, 
UM-4), following the indications (+/–) on the 
inside of the compartment.

Slide the cover back until it snaps into place.

• Insert batteries correctly according to the polarity markings 

(+/–). The batteries inserted in the opposite direction may leak.

• Replace the exhausted batteries immediately with new ones to 

prevent a leakage.

• Remove the batteries from the compartment if the remote 

control is not used for more than a month.

• If the batteries have leaked, dispose of them immediately. 

Avoid touching the leaked material or letting it come into 
contact with clothing, etc. Clean the battery compartment 
thoroughly before installing new batteries.

• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and 

manganese batteries) together. Read the packaging carefully as these 
different types of batteries may have the same shape and color.

• Dispose of the batteries correctly in accordance with your local 

regulations.

Use the remote control within 6 m (20 ft approx.) of this 
unit and point it toward the remote control sensor.

• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types 

of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a heater or stove
– places of extremely low temperature
– dusty places

Make sure that the power cable is connected to 
an AC outlet.

Turn on your TV and AV receiver.

Select the appropriate input source of the AV 
receiver connected to this unit. Refer to the 
manual supplied with your AV receiver for 
details.

Press POWER switch on the front panel.

➜ The POWER indicator lights up orange.

Press STANDBY/ON on the front panel or 
POWER ( 

 ) on the remote control to turn on 

this unit.

➜ The POWER indicator lights up green and the 

front panel display lights up.

Set the TV to the correct Video IN channel (e.g., 
EXT1/2, AV1/2, AUDIO/VIDEO, etc. Refer to 
the manual supplied with your TV for details).

➜ The default screen appears on the TV.