Yamaha XMV8280/XMV8140/XMV8280-D/XMV8140-D Owner's Manual

XMV8280/XMV8140/XMV8280-D/XMV8140-D Owner’s Manual

This chapter describes the operations you can perform from the 
front panel.



*1: “X+Y” means “operate Y while operating X.” For example, “[SELECT] A + encoder” means that you should hold down the [SELECT] A 

button and operate the encoder.

If you modify the parameter settings, do not turn the power 
switch OFF for at least one second. Otherwise, the changes to 
the settings may be lost.

[FUNCTION]

While you hold down the [FUNCTION] button, the current oper-
ating mode will be shown in the display. The modes are indi-
cated as follows.

[FUNCTION] + encoder 

*1

Use the encoder to change the operating mode.
When you release the [FUNCTION] button, the operating mode 
shown at that time will be selected; the display will show the 
parameter value.
If a certain period of time elapses without any operation being 
performed, the operating mode will be switched back to “Atten-
uation setting.”

[MUTE] + [SELECT] (of the chan-
nel to be muted) 

*1

When muting turns on, the [MUTE] indicator of the selected 
channel will lit.
When muting turns off, the [MUTE] indicator will go unlit.

[FUNCTION] + [SELECT] A 

*1

When front panel lock is temporarily disabled, the [PANEL 
LOCK] indicator will flash.
When front panel lock is enabled, the [PANEL LOCK] indicator 
will lit. While the front panel is locked, “LC” is shown in the dis-
play.
Even if front panel lock is temporarily disabled, it will be 
relocked when one minute passes without any operation being 
performed or when the power is turned off.

ATT

Attenuation setting

POL

Polarity setting

HPF

Turn the high pass filter on/off and 
change the cutoff frequency

SRC

Analog/digital input selection

SIG

[SIGNAL] indicator display selection

DIS

Digital input sensitivity selection