ZyXEL Communications Plumbing Product metrogigabit switch User Manual

 Chapter 31 Error Diable

MGS3700-12C User’s Guide

Use this screen to configure the Switch to automatically undo an action after the 
error is gone. Click the Click Here link next to Errdisable Recovery in the 
Advanced Application > Errdisable screen to display the screen as shown.

Figure 159   Advanced Application > Errdisable > Errdisable Recovery 

The following table describes the labels in this screen.

Table 101   Advanced Application > Errdisable > Errdisable Recovery 

Active

Select this option to enable the error-disable recovery function on the 
Switch.

Reason

This field displays the supported features that allow the Switch to shut 
down a port or discard packets on a port according to the feature 
requirements and what action you configure.

*

Use this row to make the setting the same for all entries. Use this row 
first and then make adjustments to each entry if necessary. 

Note: Changes in this row are copied to all the entries as soon as you 

make them.

Timer Status

Select this to allow the Switch to wait for the specified time interval to 
activate a port or allow specific packets on a port, after the problem was 
gone. Deselect this option to turn off this rule.

Interval

Enter the number of seconds (from 30 to 2592000) for the time interval.

Apply

Click Apply to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.