VXi Computer Hardware VX1410A User Manual
STATus Subsystem
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
3–53
STATus:OPERation:VXITrigger:ENABle
STATus:OPERation:VXITrigger:ENABle?
STATus:OPERation:VXITrigger:ENABle?
Sets or queries the contents of the VXI TTL Trigger Monitor Enable register.
Setting unused enable bits does not generate an error; the bits are ignored.
Setting unused enable bits does not generate an error; the bits are ignored.
If the power-on status clear flag is FALSE (see *PSC command on page 3–166)
at power on, the register value will be restored from nonvolatile RAM; otherwise
the register value at power on is set to #H7FFF. Executing the STATus:PRESet
command sets the register value to #H7FFF.
at power on, the register value will be restored from nonvolatile RAM; otherwise
the register value at power on is set to #H7FFF. Executing the STATus:PRESet
command sets the register value to #H7FFF.
STATus:OPERation:VXITrigger:ENABle <Mask>
STATus:OPERation:VXITrigger:ENABle?
<Mask>
Query response
<NRf> | <Nondecimal Numeric>
0
0
≤
N
≤
#HFFFF
<NR1>
Not Applicable
–222, “Data Out of Range”
You attempted to set the enable register to an illegal value.
You attempted to set the enable register to an illegal value.
None
Command:
STAT:OPER:VXIT:ENAB #H0001
Query:
STAT:OPER:VXIT:ENAB?
Response:
1
STATus:OPERation:VXITrigger?
STATus:OPERation:VXITrigger:CONDition?
STATus:PRESet
STATus:OPERation:VXITrigger:CONDition?
STATus:PRESet
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands