VXi Computer Hardware VX1410A User Manual
Getting Started
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
1–23
Perform the following steps if you intend to install the optional EMI Intermodule
shields and/or blank EMI filler panels. Part numbers are listed under Optional
Accessories on page 9–9:
shields and/or blank EMI filler panels. Part numbers are listed under Optional
Accessories on page 9–9:
NOTE. It is only necessary to install the EMI intermodule shields if your VXIbus
module does not have EMI shielding. Backplane EMI DIN shields are standard.
module does not have EMI shielding. Backplane EMI DIN shields are standard.
1. Refer to Figure 1–14 and slide the EMI intermodule shields between the
grooves of the card guide on one side of each installed VXIbus module. This
is recommended to use with unshielded modules; the shielding may not be
compatible with some shielded modules. The shield conforms with the VXI
specification for intermodule shielding.
is recommended to use with unshielded modules; the shielding may not be
compatible with some shielded modules. The shield conforms with the VXI
specification for intermodule shielding.
2. Install a blank EMI front panel for each empty slot, making sure that the
EMI shielding is in contact with the adjacent front panel.
Double panel EMI filler
Single panel EMI filler
EMI intermodule shield
EMI Shielding strip
(standard part on
mainframe)
(standard part on
mainframe)
Figure 1–14: Installing the EMI intermodule shield and front panel EMI fillers
EMI Configurations