Viking Huskylock 936 User Manual

The buttons below can either be pressed one step at a time or held until the desired setting is 

obtained.

1.        : Auto button

Press for Auto Mode. Standard settings are displayed.

2.        : Memory button

Press to retrieve stored settings or store new setting preference in memory.

3.        : Stitch selection button

Retrieve the 16 pre-set stitches in Auto Mode.

4.        : Fabric selection button

Select fabric type in Auto Mode.

5.        : Cursor button

Access Manual Mode to enter and or alter settings.

Cursor moves as follows:

Stitch length - Differential feed ratio - Cutting width(if applicable) - Thread tension

6.-7.             : Plus(+) and Minus(-) button

In Manual Mode, settings increase(+) or decrease(-).

In Memory Mode, cursor moves to stored memories.

8.            : Speed selection button

Select maximum speed mode. Refer to “1-4. Sewing speed (page 5)”.

9. Sewing Advisor display

All stitch settings can be shown in the display.

 

—9—