Vauxhall Combo Owner's Manual

C

The control indicator is illuminated when 

main beam is on and during headlight 

flash - see page 93. 

!

  

Preheating for diesel engines 3,

diesel particle filter 3

Control indicator illuminates during 

preheating. 
Preheating system switches on only if 

outside temperature is low. 
Flashing (vehicles with diesel particle filter): 

The diesel particle filter must be cleaned. 

As soon as the road surface and traffic 

situation permits, briefly increase speed 

over 25 mph (40 km/h). The control 

indicator goes out as soon as cleaning is 

complete.

T

Easytronic Winter programme 3 

Control indicator is illuminated when 

Winter programme is enabled. 
Further information – see page 113. 

r

The control indicator is illuminated when 

the fog tail light is on - see page 95. 

Picture no: 18122s.tif

p

The control indicator illuminates when the 

ignition is switched on and goes out shortly 

after the engine starts. 
If it illuminates when the engine is running:

Stop the vehicle and switch off the engine. 

The battery is not being charged. Engine 

cooling may be interrupted. Check drive 

belt condition and tensioning before 

contacting a workshop. We recommend 

your Vauxhall Authorised Repairer. 

Picture no: 

R

clutch system 3

The control indicator illuminates when the 

ignition is switched on if the handbrake is 

applied or if the brake or clutch fluid level 3 

is too low. Further information - 

see pages 130, 186. 

On vehicles with Easytronic 3, control 

indicator R flashes for a few seconds after 

the ignition is switched off if the handbrake 

has not been applied. 

9

If it illuminates when the handbrake is not 

applied: stop the vehicle; interrupt your 

journey immediately. Consult a 

workshop. We recommend your Vauxhall 

Authorised Repairer.