UTStarcom UT-300R2 User Manual
Chapter 4 Web-based Management
21
Figure 9
WAN Setting
−
Add menu
Note: you can configure up to seven different connections on
your UT-300R2 ADSL Modem/UT-300R2 by assigning a
number to each configuration using the drop-down menu
corresponding to the PVC Number heading. This could be
useful if you have several ISPs and need to configure the UT-
300R2 differently for each. Most users will require only single
PVC, however.
number to each configuration using the drop-down menu
corresponding to the PVC Number heading. This could be
useful if you have several ISPs and need to configure the UT-
300R2 differently for each. Most users will require only single
PVC, however.
Configuring a Bridged Connection for the WAN
A bridged connection between your ISP and your LAN (the
computers in your house or office) is the simplest type of
connection possible. The UT-300R2 will simply convert the
incoming and outgoing packets to the correct format for each
side of the connection (Ethernet for the LAN, ATM for the WAN).
computers in your house or office) is the simplest type of
connection possible. The UT-300R2 will simply convert the
incoming and outgoing packets to the correct format for each
side of the connection (Ethernet for the LAN, ATM for the WAN).
For a bridged connection it will be necessary for most users to
install additional software (supplied by your ISP) on any
computer that will use the UT-300R2 for Internet access. The
additional software is used for the purpose of identifying and
install additional software (supplied by your ISP) on any
computer that will use the UT-300R2 for Internet access. The
additional software is used for the purpose of identifying and