UTStarcom UT-300R2 User Manual
Chapter 4 Web-based Management
23
2
Also under the
VPI/VCI
, you will need to enter two
numbers, the
VCI
and
VPI
values. These numbers are
used to define a unique path for your connection. Your ISP
should give you the specific settings for the VPI and VCI
numbers to enter. Type in the correct values assigned by
your ISP.
should give you the specific settings for the VPI and VCI
numbers to enter. Type in the correct values assigned by
your ISP.
3
Select the
Encapsulation
type (LLC or VcMux) radio
button that corresponds to the encapsulation in use by
your ISP.
your ISP.
4
When you are satisfied that all the WAN settings are
configured correctly, click on the
configured correctly, click on the
Apply
button.
5
The new settings must be saved and the UT-300R2 must
be restarted for the settings to go into effect. To manually
save and reboot the UT-300R2, click on the
be restarted for the settings to go into effect. To manually
save and reboot the UT-300R2, click on the
Tools
directory tab and then click the
System
menu button. On
the menu that appears, click he
Save & Restart
button.
The UT-300R2 will save the new settings and restart.
Upon restarting the UT-300R2 will automatically establish
the bridged WAN connection.
Upon restarting the UT-300R2 will automatically establish
the bridged WAN connection.
Note: Some accounts use PPP connection software for their
Internet service connection. If you have been given a CD with
PPP connection software, install this now as instructed by your
service provider. After the UT-300R2 has rebooted it will
negotiate the ADSL connection. Use the connection software to
log on to the ISP network and access the Internet.
PPP connection software, install this now as instructed by your
service provider. After the UT-300R2 has rebooted it will
negotiate the ADSL connection. Use the connection software to
log on to the ISP network and access the Internet.