Unisys EFP9800 Series User Manual

 

 

3–28  

3255 

4073–002 

Three diagnostic print tests and a general print test are available: 

• 

Print configuration, ROM CRC, and internal switch packs information. 

• 

Continuous slip printing. 

• 

Print each character in the ASCII character set. 

• 

General print test 

The following procedures describe how to run each of these tests. 

This test produces a printout of all ROM CRC, internal switch pack, and 
configuration information. See the sample printout later in this section. 

1.  Turn the printer off. 

2.  Turn the printer to the back to access the DIP switches and write down the 

current switch settings. 

3.  Set the DIP switches to the following settings: 

ON OFF N/A ON ON ON N/A N/A 

 

4.  Turn the printer back on to begin printing the test. 

5.  Turn the printer off to stop the test. 

6.  Turn the printer off and reset the DIP switches to what they were when you 

started. 

 

For normal operation settings, see “Setting Switches” in section 5. 

7.  Turn the printer back on to begin normal operation.