Symmetricom XLi IEEE 1588 User Manual

2

5

1

For example, enter:

XLi responds:

OK<CR><LF>

RESETING THE UNIT<CR><LF>

PLEASE WAIT…<CR><LF>

To obtain the IP address of the unit Standard network port, enter:

The XLi responds (example):

F100 IP 206.54.0.21<CR><LF>

The three commands, F100 IP, F100 SM, and F100 G, can be concatenated to set all three values 
simultaneously. To do so use the following format:

The three commands (i.e., IP, SM, G) can be used in any order relative to each other. A colon 

separator “:” can be used instead of <S> following IP, SM, and G (e.g., 

IP:192.168.46.150

)

For example, using appropriate values for your network, enter something similar to:

XLi responds:

OK<CR><LF>

RESETING THE UNIT<CR><LF>

PLEASE WAIT…<CR><LF>

F100 SM can be used concurrently with F100 IP and F100 G. See the last example provided in 

the 

 section, directly above this one.

Use function F100 SM to display or configure the Subnet Mask. To set the Subnet Mask and restart the 
unit, enter: