Symmetricom 1000 User Manual

Chapter 4 Provisioning the TimeProvider
Setting Communications Parameters

 TimeProvider User’s Guide

Setting the Handshaking (Flow) Mode
Use the ED-EQPT command to provision the handshaking mode on the local Craft 
or Remote port to None, Hardware, Software, or Hardware/Software.

ED-EQPT:[<tid>]:<aid>:[<ctag>]::<keyword>=<value>;

This command has a default access level of ADMIN.

ED-EQPT::COML:TS1000::FLOW=HW;

TIMEPROVIDER 03-10-24 10:12:33

M

TS1000 COMPLD

;

Setting the Echo Mode
Use the ED-EQPT command to provision the echo mode on the local Craft or 
Remote port to On or Off. When set to ENABLE, characters you type at the 
keyboard also appear on the monitor. If one keystroke generates two characters on 
the monitor, set this parameter to DISABLE.

You can also use ED-EQPT to echo the <tid> in the response from the TimeProvider. 

ED-EQPT:[<tid>]:<aid>:[<ctag>]::<keyword>[=<value>];

This command has a default access level of ADMIN.

ED-EQPT::COML:TS1000::ECHO=ENABLE;

TIMEPROVIDER 03-10-24 10:15:04

M

TS1000 COMPLD

;

COMp
p = L | R

FLOW 

NONE | SW | 
HW | SWHW

Flow control

NONE

COMp
p = L | R

ECHO 

ENABLE | DISABLE

Input echo

DISABLE

TIDQUIET

ENABLE | DISABLE

Enables or disables the 
echo of the <tid>. This 
is a session setting.

DISABLE