Sony SE366 User Manual

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / appendix.fm / 13.11.2008

Sc

hablone 200

4_12

_27

You cannot connect to the 
Internet.

ì

Check whether the Connect on demand option is 
deactivated. In this case, connections cannot be 
opened automatically.

ì

Select Connect on demand. 

ì

The connection may have been terminated manu-
ally with the Connect on demand option selected. 
– Open the connection again manually using 

the Connect button 
or

– Restart the Gigaset SE366 WLAN.
In both cases, the Connect on demand setting will 
be active again. 

ì

Make sure that you have entered the access data 
supplied by your service provider correctly.

ì

There may be a problem at the service provider 
end. Get in touch with your service provider.

You cannot open a connec-
tion from a wireless device 
to the Gigaset SE366 WLAN.

You try to perform WPS registration on the network 
adapter but the registration button has not been 
pressed on the Gigaset SE366 WLAN.

ì

Press the Registration button on the Gigaset 
SE366 WLAN back panel and activate WPS within 
two minutes on the network adapter.

You defined a PIN for WPS registration but the network 
adapter doesn’t use any PIN or not the right one. 

ì

Check the wireless network encryption settings and 
find out the PIN that is used by the Gigaset SE366 
WLAN. Enter this PIN on the network adapter.

The wireless network adapter is not using the 
correct SSID. 

ì

Change the SSID on the network adapter or use the 
WPS function.

You have set SSID and encryption manually and then 
performed WPS registration.

ì

Check which SSID and pre-shared key are used and 
configure the WLAN clients with this data.

MAC access control is activated, but the PC is not 
included in the MAC address list.

ì

Enter the PC that is to register via WPS in the MAC 
address list.