SMART Technologies Board Software 9.5 User Manual

6

You only need to create the initial setup.iss file once. You can then use this setup.iss file to 

remove the same version of SMART Board software from other computers on your network. 

1. Check the version of SMART Board software that are installed on your computers. Refer to the 

table above to identify the GUID you must use in the following commands.

2. Click Start > Run and type CMD into the Open field.

A DOS window opens.

3. Type:

GUID\setup.exe" /r -l0x9 --AddRemove

and click OK.

This command removes SMART Board software and creates a setup.iss file in the root of the 

Windows folder. 

4. Place the setup.iss file on a network server where all computers can access it.

1. Go to each computer and click Start > Run and type CMD into the Open field.

A DOS window opens.

2. Type: 

GUID\setup.exe" /s -l0x9 --AddRemove /f1"path to the 

setup.iss file\setup.iss" /f2"destination path for the uninstall log 

file\setup.log"

and click OK.