SimpleTech ZeusIOPS User Manual
34
Zeus
IOPS
3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0
SCSI I
NTERFACE
B
LOCK
This section provides information on the SCA-2 connector of the Zeus
IOPS
Fibre Channel SSD.
SCA-2 I
NTERFACE
C
ONNECTOR
The 3.5-inch SSD is equipped with a 40-pin SCA-2 bus connector. The connector is located on the
underside of the drive. DC power and bus traffic is supplied through a non-shielded 40-conductor I/
O cable. Figure 2 shows the location of Pins 1, 20, 21 and 40 relative to the connector housing. See
underside of the drive. DC power and bus traffic is supplied through a non-shielded 40-conductor I/
O cable. Figure 2 shows the location of Pins 1, 20, 21 and 40 relative to the connector housing. See
Connector Pinout
on page 19.
Figure 2.
SCA-2 Interface Connector