Sierra Wireless RAVEN 1X 20070914 User Manual
Raven 1x
113
20070914
•
n=0 ‐ 255
TCPS=n
TCP connection time‐out (TCPS) units. Specifies a time interval
upon which if there is no in or outbound traffic through a TCP
connection, the connection will be terminated.
upon which if there is no in or outbound traffic through a TCP
connection, the connection will be terminated.
•
n=0 : minutes
•
n=1 : seconds
TCPT=n
Interval to terminate a TCP connection when no in or
outbound traffic. This value affects only the TCP connection in
TCP PAD mode.
outbound traffic. This value affects only the TCP connection in
TCP PAD mode.
•
n=interval
Caution: TCPT should never be 0 when using the TCP mode. A
broken TCP session can result in the modem being left with a TCP
half-open connection that can only be terminated with a reset.
broken TCP session can result in the modem being left with a TCP
half-open connection that can only be terminated with a reset.
*ENQ=n
Outputs an ENQ [0x05] after the TCP CONNECT delayed by
the Delay Connect Response time (S221).
the Delay Connect Response time (S221).
•
n=0 : Disabled (Default).
•
n=1 : Enable ENQ on CONNECT.
UDP
This group includes commands specific to UDP serial commu‐
nications.
nications.
Figure 1-6: AceManager : UDP
AIP=n
Allow IP address.