SeaLand 1 2500 Series User Manual

8

.

Before  first-time  use  of  the  2500  series  sanitation 

system, check the following:
•  The vacuum cassette tank is inserted correctly.
•  The fresh water supply tank is full.
•  The power supply is on.

GREEN – Ready to flush.

RED – Cassette full, or cassette  

removed, or undervoltage.  

Toilet cannot be flushed.

YELLOW – Vacuum pump is running.  

Do not flush toilet.

The yellow LED illuminates for about one minute. 
Then the green LED illuminates. 
THE SYSTEM IS READY FOR OPERATION.

1.  Make sure there is enough water in the bowl to 

cover the flush ball and seal in bottom of bowl. Lift 

pedal to add water to bowl (if needed for flushing 

solids).

2.  To flush, press pedal down to floor and hold down 

for 2 or 3 seconds. Keep seat lid closed to reduce 

noise.

3.  The  toilet  will  flush  liquids  effectively  with  only  

1 pint (0.4 liters) of water per flush.

4.  Use  only  rapid-dissolving  toilet  paper  designed 

for low water flow toilets. Some residential bath 

tissues may clog the system.

5.  If  the  cassette  tank  is  full,  the  

tank is removed from the  docking 

platform, or the voltage is too low, 

the  red  LED  illuminates  and  the 

system switches off. The system 

cannot be used until the cassette 

is emptied, inserted properly in the 

docking platform, and the correct 

voltage is restored.

1.  Raise  the  latch  (A).  Holding  the  carrying 

handle (B), pull cassette straight back.

2.  When reattaching cassette tank, make sure 

it  is  placed  correctly  on  docking  platform. 

Make sure latch engages after pushing tank 

into platform.

A

B