Sanyo PJ MASTER POA-PJNM01 User Manual

Chapter 3 Basic operation

Customizing the display columns

Changing the status column indication
1. Select

Column Selection from System menu. The setting window will appear.

2. On the window, check the column name you want to display on the status list view window .

Column

Description

Target Name

Name of the network equipment

Power Status

Status of the network equipment (ON:Normal, OFF:Normal, OFF:P-Mng, Cooling,
CountDown, etc.)

Lamp Status

Status of lamp (On, Off, Err, LampNonLight, etc. indicated with lamp1, lamp2, lamp3,
lamp4 sequentially)

Input Signal

Name of input signal (Analog, Digital, S-Video, Video, Y/Cr/Cb, Y/Pr/Pb, etc.)

Input Status

Status of input signal (On, Off, Interrupted)

Input Select

Displays input mode (1,2,3 etc)

Network Status Status of network connection (Disconnect, Connect)

Temperature A Displays inside temperature A of the equipment (in Celsius or Fahrenheit)

Temperature B Displays inside temperature B of the equipment (in Celsius or Fahrenheit)

Temperature C Displays inside temperature C of the equipment (in Celsius or Fahrenheit)

Lamp Time

Displays lamp use time (Indicated with lamp1, lamp2, lamp3, lamp4 sequentially)

IP Address

Displays IP address of the equipment

Model Name

Displays model name of the equipment

Projector Time Displays accumulated projector use time

PJ-Net Ver.

Displays the version of the PJ Master or Network Board ﬁrmware

PJ Ver.

Displays the version of the projector ﬁrmware

3. To change order of the display column on the status list, select column you intend to change order

and click To up or To down.

4. Click

OK to set the display column. The setting window will close.

* When specifying the column width by numeric value, enter number (0 to 9999) onto “Column width” text box.
* When changing the column width or column order on the status list view window, it is reﬂected to the

column selection window.

* Some of the column items may not effective depending on the connected target.