Roberts Radio ColourStream User Manual

When using the FM mode your radio can be set either to scan local stations 
or to scan all stations including distant radio stations.

From the FM Menu list touch Stop on stations. The current setting will 
be displayed in yellow. To set your radio so that only the stations with 
the strongest signals are found during scanning touch Stop on stations 
until 'Strong

' appears on the display. (Normally this will restrict scanning 

to local transmissions).

Alternatively, to set your radio so that all available stations are found during 
scanning (local and distant transmissions) touch Stop on stations until 
'All' appears on the display.  

If the FM radio station being listened to has a weak signal, some hiss may 
be audible. It is possible to reduce this hiss by forcing the radio to play the 
station in mono rather than stereo.

Enter the FM Menu list.The current stereo/mono setting will be displayed 
in yellow. 

To switch to mono mode in order to reduce the hiss from a weak FM signal 
select Force mono until 'Yes' appears on the display.

Alternatively, to return to the stereo/mono mode touch Force mono until 
'No' appears on the display.