Roberts Radio ColourStream User Manual

The clock display used in standby mode and on the playing mode screens 
can be set to 12 or 24 hour format.  The selected format is then also used 
when setting the alarms.

Access the main Settings menu. Touch Time Settings and scroll down 
until the current clock format is displayed. The current time format will 
appear in yellow.

Touch Time format to select either 12 or 24 hour format. If the 12 hour 
clock format is chosen, the radio will then use the 12 hour clock for the 
setting of alarms, and will display a 12 hour clock with an AM or PM 
indicator when in standby mode.

The ColourStream radio will normally set its clock automatically to UK 
time after a connection to the Internet has been established. Should you 
need to set the time manually, change the time zone, or manually switch 
from winter to summer time (GMT to BST - also known outside the UK as 
daylight savings time), then please follow this procedure. Manually setting 
the clock will cause the Time Source setting to be set to 'None'.

Access the main Settings menu. Touch Time Settings.

Select Manual Setup to enter the time manually.

Select Time and then use the Up and Down arrows to 
set the correct time.

Touch the Back button to return to the previous screen.