Pitney Bowes DM230L User Manual
SV61891 Rev. A
7-7
DM230L, DM330L, DM350L Operating Guide
Tape Feeding Problems
Tape Stalls
in Feeder
(DM330L Only)
in Feeder
(DM330L Only)
Improper Loading
Load tape strips print side up and guide them all the way into the feeder
– push them in as far as they'll go.
The backing paper must be its original length.
Load tape strips print side up and guide them all the way into the feeder
– push them in as far as they'll go.
The backing paper must be its original length.
Tape or Paper
Fragments in
Feeder
Fragments in
Feeder
HINT: Remove
remaining tape
strips before you
add a new stack.
remaining tape
strips before you
add a new stack.
Clean tape strip feeder:
1. Remove the moistener.
2. Slide the tape strip feeder cover to the left and remove.
3. Remove tapes. Inspect feeder and clean out any debris.
1. Remove the moistener.
2. Slide the tape strip feeder cover to the left and remove.
3. Remove tapes. Inspect feeder and clean out any debris.
continued on next page ...
Slide cover to left